Yes. The website documents Plaza Laurier in Plateau-Mont-Royal and Collège Sainte-Anne in Lachine. Their published project descriptions and photographs are useful references for an operating discussion.
Montréal
Parking access control in Montréal
Plan parking access for a Montréal condominium, office, campus or mixed-use property with Lexoh’s kiosks, access equipment and Security Center software. Start with the actual garage approach, user groups and work windows, then define installation and service at the site address.
Make the buying decision
Plan shared garage access in Montréal
For a Montréal garage, decide how residents and employees will share the entrance with visitors and service vehicles. Measure the stopping position, the distance from the driver to the reader, the door or barrier interface, and the space available before the street. Include payment where the property’s operating policy requires it.
| Property or project | Operating requirement | What to verify |
|---|---|---|
| Condo garage | Resident rights and guest approval | Vehicle changes, door interface and a test with an expired visitor credential. |
| Office or mixed-use property | Landlord allocation and tenant authority | Separate employee, guest and delivery routes. |
| Campus or paid parking | Regular users plus occasional payers | Validate credentials, payment and assistance in the same lane. |
| Occupied-site retrofit | Existing devices and work windows | Agree temporary access and staged acceptance. |
Operating example
One entrance, several parking journeys
A mixed-use parking system needs more than an opening command. A tenant may hold a recurring permit, a visitor may need a short stay, and a delivery may require access to a separate zone. Lexoh connects those rights to lane equipment and the operating record in Security Center. Start with the people who arrive, then select credentials, payment and assistance around their journeys.
- A recurring user presents an assigned RFID credential or a supported vehicle identifier; the configured right determines the permitted entrance.
- A visitor follows the configured temporary-access or payment journey. The help point identifies the lane so the operator can respond to the correct device.
- The operator reviews the event when an entry is refused, a credential is replaced or an opening is authorized. Visitor rights expire according to the agreed policy.
01
Use Montréal references with the right operating context
The documented Plaza Laurier project in Plateau-Mont-Royal modernized parking access from standalone equipment to Lexoh cloud management. The Collège Sainte-Anne project in Lachine documents a different campus operation with kiosks, barriers, payment and access journeys. Use the reference that resembles your task; the two sites are not interchangeable designs.
- Review the photographs and published project description.
- Identify differences in users, lanes and payment policy.
02
Prepare the survey before pricing the garage
Provide the site address and photographs taken from a driver’s approach, the stopping point and the exit. An indoor garage, outdoor barrier and shared loading area create different installation obligations. Record ceiling clearance, door travel, available power, network routes and the property’s allowed work periods. For an illustrative occupied garage, agree a temporary arrival route before replacing the controller. Test a resident, an approved visitor and an expired visitor right before switching the entrance back to normal operation.
- Identify who controls building access during work.
- Confirm visitor and delivery continuity with the property manager.
- Include signage and assistance at the point where a driver needs them.
03
Define installation and ongoing response separately
A Montréal project proposal should name the installer, site-work responsibilities and service arrangements for the specific address. Agree remote support, on-site escalation and travel terms before relying on an intervention schedule.
- Separate equipment supply, civil/electrical work and configuration.
- Request a written commissioning and operator-training scope.
04
Give each user the right way to enter
Give regular users a card or vehicle credential and temporary visitors a time-limited access method. Lexoh connects RFID, UHF, QR or plate recognition to the permissions for the correct entrance. Reader compatibility, camera position and the lane layout determine which options fit your site; Security Center keeps the access event available to the operating team.
- Match the card or vehicle credential to the supported reader, not just the term “RFID”.
- Test approach angle, stopping position and adjacent-lane reads using actual vehicles.
- Define replacement, expiry and operator-assisted access before issuing credentials.
05
Modernize access while assessing what can stay
Bring existing equipment into the review before replacing the whole entrance. Lexoh assesses the barrier, controller, readers and connections for reuse with the new access workflow. Your proposal distinguishes retained equipment, new devices and installation work, helping you compare a staged upgrade with replacement. The selected equipment must still meet the lane’s operating and safety requirements.
- Photograph nameplates and controller connections before selecting replacement readers.
- Plan a temporary operating procedure for the changeover.
- Accept the complete vehicle journey, including detection and assistance, rather than testing the opening relay alone.
06
Manage in the cloud, keep local devices connected offline
Supervise sites and access records through Lexoh Security Center while a local mesh network supports communication between site devices during an internet interruption. The installed controllers and configured permissions define the offline access workflow. Commissioning tests cover interruption and recovery; electrical backup and payment-provider authorization are planned separately.
See the platform architecture →07
Installation, training and support in Montréal
Bring equipment, software and the operating team into one delivery plan. Lexoh serves projects across Canada, with installation responsibilities and support arrangements defined for your address. Training covers everyday permissions, access refusals and authorized remote commands. The proposal identifies the contractor, preparation work, service hours and on-site responsibilities so your team knows how the system will be installed and supported.
- Include photos, a lane plan, opening hours and the expected vehicle types in the project brief.
- Separate hardware, software, recurring services and installation in the proposal.
- Record acceptance results and the local assistance procedure before handover.
Connect the equipment and the operating software
At Collège Sainte-Anne in Lachine, Lexoh kiosks and barriers support campus access and payment. Plaza Laurier documents a separate parking modernization. Use these Montréal installations to discuss the lane equipment, then use the Security Center illustration to review how an operator views an entry device and its controls.
Planning questions — Montréal
Possibly, after reviewing its condition, controller, supported interface and required safety design. The parking access proposal must state what is retained and who verifies the complete door operation.
Send the address, entrance plan, photographs, user groups, existing equipment, payment policy and work windows. Include power/network information and the site contact.
Define the user groups, valid hours and the staff allowed to issue or revoke access. Test a right for each group, a revoked right and a visitor approval. Sharing an entrance does not require every tenant to administer the other tenants’ users. Confirm those boundaries in the proposed configuration.
Provide the credential type, reader model and controller details. Similar-looking cards or tags may use different technologies or formats. Confirm what the selected reader and software support, then test actual credentials before planning reuse.
Yes. Lexoh serves Canada with parking and access software and connected equipment. Send the address and scope so the proposal can define installation, shipping, local responsibilities and support for this property.
Lane count, retained equipment, identification method, payment and intercom requirements, power and network preparation, civil work and support scope determine the proposal. A reader-only price does not represent a complete operating entrance. Send site photographs and a simple lane plan for a scoped quote.
Lexoh supports local offline operation with mesh communication between devices. The installed configuration and permitted journeys are tested during commissioning. Power loss and payment authorization are separate cases and need their own operating procedures.
Yes, the project can be scoped in phases. Identify future entrances early so conduits, controller interfaces and operating groups can be planned. Accept the first lane before repeating its configuration, and check the differences at each additional site.
Prepare your Montréal project
Send the garage address, approach photographs, user groups and permitted work periods. Include the existing door or barrier model so Lexoh can review reuse, installation and support.